You are hereSuzuki parts by Model / Sierra / Sierra SJ40 1981-1987 Motor F10A 1.0L 4 Cyl / Engine Sierra SJ40 F10A
Engine Sierra SJ40 F10A
The engine is a water cooled, in-line 4 cylinders, 4-stroke cycle gasoline unit with its single overhead camshaft (S.O.H.C) valve mechanism arranged for "V" type configuration. The singe overhead camshaft (S.O.H.C) is mounted over the cylinder head which is driven from the crankshaft throught a timing belt. Unlike conventional overhead valve (O.H.V) engines of the time this engine has no pushrods. Thus, drive for valves is more direct and enables the valves to folow the crankshaft without any delay.
Exchange - Reconditioned F10A Engine
F10A Reconditioned Engine
12 month or 20,000km Warranty
Choke Cable
Sierra SJ410 Choke Cable.
Throttle Cable
Throttle cable to suit Sierra SJ410.
Conrod small end bush
Bush to fit F10A conrods small end when a bush is required.
Thurst Washer Bearings
Thurst Washer Bearings to suit F10A motor. Consists of two thrust washers.
Timeing Belt Tensioner bearing
Timeing Belt Tensioner bearing to suit F10A engine.
Conrod Big End Bearings
Conrod Bearings to suit F10A engine.
Avaliable in standard, 0.25. 0.50 or 1 millimeter sizes.
The F10A has four sets of conrod bearings.
In a piston engine, the conrod bearings are the bearings on which the conrod rotates. In a reciprocating piston engine, the connecting rod or conrod connects the piston to the crank or crankshaft. Together with the crank, they form a simple mechanism that converts linear motion into rotating motion.
Mains Bearings
Mains Bearings to suit SJ410 sierra with F10A engine.
Avaliable in standard, 0.25. 0.50 or 1 millimeter sizes.
The F10A has five main bearings.
Timeing Belt 88 square tooth
Sierra SJ410 Timeing Belt 88 square tooth to suit F10A engine.
Timing belt has 88 Teeth, please check teeth count before ordering.
This is done by counting 20 teeth on the crankshaft pully.
Timeing Belt 84 square tooth
Sierra SJ410 Timeing Belt 84 square tooth to suit F10A engine.
Timing belt has 84 Teeth, please check teeth count before ordering.
